Author Topic: Powering 2 6-7.4V servos off 12V battery  (Read 417 times)

0 Members and 1 Guest are viewing this topic.

Offline ScojoTopic starter

  • Beginner
  • *
  • Posts: 4
  • Helpful? 0
Powering 2 6-7.4V servos off 12V battery
« on: October 19, 2013, 10:26:32 AM »
I am looking to power a 6-7.4V servo off of a 12V DC Marine battery. The servo is the HS-5685MH.

The stall current is, at most, 3A.

What is the best way to regulate these?

I am currently looking at using a mosfet with PWM at the gate with peak 5V, source at ground, and servo connected to the drain and 12V battery. Also, a flyback diode in series with the servo.
« Last Edit: October 19, 2013, 11:13:38 AM by Scojo »

Offline jwatte

  • Supreme Robot
  • *****
  • Posts: 1,343
  • Helpful? 81
Re: Powering 2 6-7.4V servos off 12V battery
« Reply #1 on: October 19, 2013, 07:59:04 PM »
What the RC hobby people do for this is to get a 6.0 - 7.4 V UBEC and power the servo off that, the UBEC off the battery. An UBEC is really just a switching voltage converter.
You can find 7.2V / 3A UBECs for < $10 from the various cheap hobby sources, and probably would pay up to $20 from the highest-end brands/stores.

 


Get Your Ad Here

data_list