Author Topic: servo to wheel  (Read 2700 times)

0 Members and 1 Guest are viewing this topic.

Offline ltmhallTopic starter

  • Jr. Member
  • **
  • Posts: 20
  • Helpful? 0
servo to wheel
« on: October 16, 2006, 12:19:32 PM »
I am designing a mobile robot using a Basic Stamp II microcontroller. If I wanted to mount a servo motor to a 2.75 Dubro wheel could I just drill two tiny holes in to the servo horn and the wheel making sure their centers are aligned? Then place a 1 machine screw through the center of the wheel to the servo and screw it in. Will this idea work?
« Last Edit: October 16, 2006, 12:27:28 PM by ltmhall »

Offline Gopher

  • Full Member
  • ***
  • Posts: 82
  • Helpful? 0
Re: servo to wheel
« Reply #1 on: October 16, 2006, 01:23:01 PM »
Sounds workable to me, and I believe this is basically what is recomended in one of the tutorials on the site. Of course your servos will have to be modified for unrestricted rotation if you haven't already, which is also covered in a tutorial.

Good luck with the bot!

 


Get Your Ad Here

data_list