go_away

Author Topic: need to build robot arm!  (Read 1878 times)

0 Members and 1 Guest are viewing this topic.

Offline phoneTopic starter

  • Beginner
  • *
  • Posts: 1
  • Helpful? 0
need to build robot arm!
« on: September 06, 2007, 12:53:15 AM »
Hi all,

I am preparing an "art installation", and I need to figure out how to build a robot arm that will stay fixed, hold a telephone receiver, and shake. I know it soudns strange, but this is the project, and I know nothing about robots! It seems that I can get away with a plastic model, but the shaking is the tricky part that led me to the conclusion that I need to think about a part of a robot!

Where do I start? Is it possible to do and what materials will I need? Of course, funding is personal funding, and even if I try to get a phone company involved, it will take forever to actually get anything from them. And I need to start it now. So, please, any suggestions are welcomed!

I need the most simple robot arm that can give the impression of an arm and shake. The shaking can be a random pattern.

I don't know where to start, hence this post!

Offline Admin

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,659
  • Helpful? 169
    • Society of Robots
Re: need to build robot arm!
« Reply #1 on: September 06, 2007, 01:13:56 PM »
This is probably more info than you will need, but it will give you all the basics and issues you need to be concerned with . . .
http://www.societyofrobots.com/robot_arm_tutorial.shtml

After reading Im sure you will have more specific questions . . .

 


Get Your Ad Here