go_away

Author Topic: Color Sensor  (Read 2476 times)

0 Members and 1 Guest are viewing this topic.

Offline djweddleTopic starter

  • Beginner
  • *
  • Posts: 1
  • Helpful? 0
Color Sensor
« on: September 16, 2007, 09:33:20 PM »
I need a color sensor for a robotics project.  The sensor needs to detect Red, Orange, Purple, Green, and Pale Yellow.  It would be best of the sensor could be connected to a central motherboard by short wires.  I know little about color sensors and was wondering if someone could provide some recommendations.
« Last Edit: September 16, 2007, 09:48:16 PM by djweddle »

Offline Tsukubadaisei

  • Robot Overlord
  • ****
  • Posts: 293
  • Helpful? 0
Re: Color Sensor
« Reply #1 on: September 17, 2007, 06:13:00 AM »
The only time I needed a color sensor, I used a camera so I cant help you but tell you to google for it. However the little I know about them might be usefull: lego mindstorms have very good color sensors.
http://www.philohome.com/sensors/colorsensor.htm (home made)
http://shop.lego.com/Product/?p=MS1038 (official)

Also I don't think that there is a sensor only for orange, purple and pale yellow directly because those colors are not primary colors but combinations of red, green and blue. As long as you have a sensor that that can detect RGB, you will be able to detect any other color.
A.I.(yes those are my initials)

Offline Admin

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,632
  • Helpful? 169
    • Society of Robots
Re: Color Sensor
« Reply #2 on: September 17, 2007, 06:32:06 AM »

 


Get Your Ad Here