Author Topic: robot tools  (Read 1917 times)

0 Members and 1 Guest are viewing this topic.

Offline cooldogTopic starter

  • Supreme Robot
  • *****
  • Posts: 751
  • Helpful? 4
  • be nice to nerds, one day they will be your boss
robot tools
« on: November 17, 2007, 08:38:42 PM »
where can i get a crimper

also can anyone get me a link to get male pins and housing
« Last Edit: November 17, 2007, 08:39:47 PM by cooldog »
robot will rule the world and i will be building them
-admin

favorite web sites
http://www.societyofrobots.com/
http://www.instructables.com/

Offline sdk32285

  • Supreme Robot
  • *****
  • Posts: 418
  • Helpful? 0
Re: robot tools
« Reply #1 on: November 17, 2007, 08:50:22 PM »
What type of crimper do you need?

Also crimpers are usually expensive. For just a couple connectors its best to use a needle nose pliers and solder.

Try digikey.com, alliedelec.com, or mouser.com
Robots for Roboticists Blog - http://robotsforroboticists.com/

Offline cooldogTopic starter

  • Supreme Robot
  • *****
  • Posts: 751
  • Helpful? 4
  • be nice to nerds, one day they will be your boss
Re: robot tools
« Reply #2 on: November 17, 2007, 08:54:52 PM »
okay thanks

what about the pins
robot will rule the world and i will be building them
-admin

favorite web sites
http://www.societyofrobots.com/
http://www.instructables.com/

Offline Steve Joblin

  • Supreme Robot
  • *****
  • Posts: 405
  • Helpful? 2
Re: robot tools
« Reply #3 on: November 18, 2007, 09:42:06 AM »
same place... I like Jameco personally... please note that certain pin make and models may use a specific type of crimper... I would select the pin that you want to use and ask for the proper crimper to use with those pins.  I've found that while many crimpers will look almost perfectly identical, ther are very small differences that will determine if it will make a good crimp or not for a particular type of pin.

 


Get Your Ad Here

data_list