Author Topic: can i use this servo in the 50$ robot? (Read 1837 times)

mohamed · « **on:** February 13, 2008, 06:46:45 AM »

now i have Hitec HS-55 servo motor could i use this type instead fo the one mentioned in the tutorial or not?
waiting for your replies
thanks

cooldog · « **Reply #1 on:** February 13, 2008, 06:51:04 AM »

gamefreak · « **Reply #2 on:** February 13, 2008, 08:43:01 PM »

All( or at least most) servos should work, as long as it has the same type of plug you are good, the biggest problem would be current draw.

Trumpkin · « **Reply #3 on:** February 13, 2008, 08:46:59 PM »

also it has to be 360 degree modifyable.

airman00 · « **Reply #4 on:** February 13, 2008, 09:13:48 PM »

also it has to be 360 degree modifyable.

almost all servos are EXCEPT those servos with output shafts that are metal ( since u can't shave off the stopper tab)

Trumpkin · « **Reply #5 on:** February 14, 2008, 05:40:22 PM »

micro servos are sometimes non-modifyable also. although i don't know why you would want to use micro servos.

Society of Robots - Robot Forum