2

Author Topic: loading up the bootloader  (Read 1731 times)

0 Members and 1 Guest are viewing this topic.

Offline bootstrapTopic starter

  • Full Member
  • ***
  • Posts: 61
  • Helpful? 0
loading up the bootloader
« on: February 22, 2008, 01:40:37 AM »
I am using PN2 (WinAvr).Can upload the bootloaer program sing this?I also use pony prog.There is one bootloader tutorial by the admin in which it was mentioned to use Avrstudio.

http://www.societyofrobots.com/bootloader_50_robot.shtml

I only have an STK200 dongle and using that I am not able to dump the code into th micro controller with Avr Studio.Also can I make my STK200 dongle to work with AVRStudio?

Offline bootstrapTopic starter

  • Full Member
  • ***
  • Posts: 61
  • Helpful? 0
Re: loading up the bootloader
« Reply #1 on: February 26, 2008, 06:38:05 AM »
how shall i load the bootloader up into atmega8?? i only have a stk200 dongle and does avrstudio support stk200 dongle?

Offline Admin

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,658
  • Helpful? 169
    • Society of Robots
Re: loading up the bootloader
« Reply #2 on: March 03, 2008, 07:41:18 AM »
Quote
does avrstudio support stk200 dongle?
Its in the manual ;)

Literally, just do a search for 'stk200' for an answer . . .

 


Get Your Ad Here