Author Topic: Suggestion needed for creating matrix!!  (Read 1781 times)

0 Members and 1 Guest are viewing this topic.

Offline evilknight007Topic starter

  • Jr. Member
  • **
  • Posts: 42
  • Helpful? 0
Suggestion needed for creating matrix!!
« on: March 19, 2008, 09:28:49 PM »
HI ppl..
I'm planning to  start work on a prototype, that would enable the blind ppl to help reading data tat are  drawn on the computer screen.
The basic idea is to transfer the pixel data obtained from the monitor to a controller tat would in turn activate the pins in a physical matrix (made of the same number of pixels) .

Can anyone suggest a good mechanism to activate the pins( lift the pins ). Will individual electromagnets be suitable for this.??  ???

Offline Asellith

  • Contest Winner
  • Supreme Robot
  • ****
  • Posts: 648
  • Helpful? 9
  • "I'm a leaf on the wind. Watch how I soar"
Re: Suggestion needed for creating matrix!!
« Reply #1 on: March 19, 2008, 11:00:18 PM »
small solenoid would work but depending on the resolution your trying to do that could get expensive. If I understand you correctly your trying to recreate information on a screen by raising pins on a grid matrix of some sort? maybe a locking mechanism to hold the pins and then move a single solenoid with some linear motion to move the solenoid back and forth and push the pins up then reset by releasing the locking mechanism.
Jonathan Bowen
CorSec Engineering
www.corseceng.com

Offline AndrewM

  • Robot Overlord
  • ****
  • Posts: 255
  • Helpful? 0
Re: Suggestion needed for creating matrix!!
« Reply #2 on: March 20, 2008, 11:25:24 AM »
There was an article in Wired (magazine and TV show) about converting a camera image into touch based sensory input through the human tongue for blind people.  I believe they were using some type of up/down movement of pins similiar to what you are looking for.  Here's a link to the article:  http://www.wired.com/science/discoveries/news/2001/04/43174
blog: www.iamwhen.com
Saving the world from humanity one robot at a time.

Offline Admin

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,660
  • Helpful? 169
    • Society of Robots
Re: Suggestion needed for creating matrix!!
« Reply #3 on: March 23, 2008, 03:47:12 PM »
I once got to open up just such a device that was made in the late 80's. It was an impressively designed machine using state of the art for the time.

It had NiCad batteries, artificial muscles to raise/lower the pins for touch, a driver each for like 50 muscles, all done on PCB, etc.

I'm sure they already sell much more advanced ones already today.

 


Get Your Ad Here

data_list