go_away

Author Topic: Are stepper motors "dead"?  (Read 2291 times)

0 Members and 1 Guest are viewing this topic.

Offline alexanderTopic starter

  • Jr. Member
  • **
  • Posts: 18
  • Helpful? 0
Are stepper motors "dead"?
« on: April 27, 2008, 10:35:20 AM »
Hi.

Sorry for my stupid question (and my horrible english).

Are stepper motors "dead"? I'm seeing a lot of projects using servo motors and none using stepper motors.

Why? Is it more easy to control servo motors (I'm waiting my first at this week ...)?

What advantages have stepper motors against servo motors?

[]'s
Alexander
Brazil - Rio de Janeiro

Offline izua

  • Supreme Robot
  • *****
  • Posts: 682
  • Helpful? 0
Re: Are stepper motors "dead"?
« Reply #1 on: April 27, 2008, 11:19:34 AM »
check hobby-level CNC machines.
stepper motors are easier to control and manage, open-loop, as terminlogy puts it. you give a pulse to the driver, coils energize in a different pattern (levels if ustep), motor turns a fixed number, feedback is rarely needed.
at a servo mechanism, you energize the coil, check where the motor axle is, and depending on where you need it to go, lower current into the coil or change direction.
Check out my homepage for in depth tutorials on microcontrollers and electronics.

Offline AndrewM

  • Robot Overlord
  • ****
  • Posts: 255
  • Helpful? 0
Re: Are stepper motors "dead"?
« Reply #2 on: April 27, 2008, 12:38:50 PM »
Servos are an all in one package.  Just supply voltage and send a pulse signal.   So they are easier to use at any level.

Stepper motors require a little more circuitry and understanding (stepper motor driver circuits), but can be much more precise and provide more torque.
blog: www.iamwhen.com
Saving the world from humanity one robot at a time.

Offline benji

  • Supreme Robot
  • *****
  • Posts: 832
  • Helpful? 0
Re: Are stepper motors "dead"?
« Reply #3 on: April 28, 2008, 10:49:21 AM »
steppers are heavey,,more expensive,,
steppers can be more precise,,allows precise steps,,
nothng is dead  :)
good ol' BeNNy

Offline Admin

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,657
  • Helpful? 169
    • Society of Robots
Re: Are stepper motors "dead"?
« Reply #4 on: April 29, 2008, 02:49:01 PM »
Hmmm I think alexander has a good point, steppers are rarely used at all because of the reasons benji just mentioned . . . I honestly have never used a stepper because servos have always been the better choice for my particular applications.

The advantage of a stepper over a servo is that it can rotate significantly faster, offer more torque, and rotate continuously with good precision.

 


Get Your Ad Here

data_list