go_away

Author Topic: AVR atmega inductor iron?  (Read 3859 times)

0 Members and 1 Guest are viewing this topic.

Offline AdminTopic starter

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,659
  • Helpful? 169
    • Society of Robots
AVR atmega inductor iron?
« on: January 03, 2007, 09:00:04 AM »
Im wiring up an ATMEGA 644 and supposedly a 10uH inductor iron should be placed between AVCC/AREF (pins 18 and 20) and VCC (pins 4 and 6). I have a 10uH inductor iron I can use . . . but what does this thing do for the microcontroller? Is it really necessary?

Offline Militoy

  • Expert Roboticist
  • Full Member
  • *****
  • Posts: 111
  • Helpful? 0
Re: AVR atmega inductor iron?
« Reply #1 on: January 03, 2007, 09:17:56 AM »
Any time an inductor is put into a power line, the purpose is to present a series high impedence to AC current. They work in series, similar to the way capacitors work in parallel (shunt) to provide a low-impedence path for unwanted AC currents. In the case of a microprocessor, if heavy pulsed currents are being pulled off the Vcc line, the inductor may be used to offer some isolation from induced ripple to the more critical reference line (AREF).


(edited spelling 1-3-07 R.L.)
« Last Edit: January 03, 2007, 02:11:06 PM by Militoy »

Offline Hal9000

  • Supreme Robot
  • *****
  • Posts: 338
  • Helpful? 0
Re: AVR atmega inductor iron?
« Reply #2 on: January 03, 2007, 01:40:30 PM »
I haven't used this in practical application yet, but you know that you can emulate inductance with operational amplifiers right?

I haven't got a clue about the practical constraints of this, like 10uH right?
"The truth is, you can't hide from the truth, cos the truth is all there is" - Handsome Boy Modeling School

 


Get Your Ad Here