go_away

Author Topic: AVR ATmega  (Read 2319 times)

0 Members and 1 Guest are viewing this topic.

Offline vishalsaxenaTopic starter

  • Jr. Member
  • **
  • Posts: 23
  • Helpful? 0
AVR ATmega
« on: June 12, 2008, 02:08:57 AM »
Hey people I want basic knowlege of electronics specially.....AVR ATmega8

first I thought of reading its datasheet.........but its little too much.........

To tell you I dunn have any knowlege of digital and analog circuits......
bcoz Ive just passed my 1st year of  B.E.(Hons).....
Please help

Thank you
Vishal Saxena

Offline benji

  • Supreme Robot
  • *****
  • Posts: 832
  • Helpful? 0
Re: AVR ATmega
« Reply #1 on: June 12, 2008, 05:00:25 AM »
gotta tell ya to google it would give ya many tutroials

try "AVR tutorial"

the datasheet is to check what properties that mcu has
good ol' BeNNy

Offline pomprocker

  • Supreme Robot
  • *****
  • Posts: 1,430
  • Helpful? 16
  • Sorry miss, I was giving myself an oil-job.
Re: AVR ATmega
« Reply #2 on: June 12, 2008, 10:46:50 AM »
I learned it by playing around with PonyProg lock bits, and by playing around with the registers and such in AVR Studio, and reading the datasheet, and ask questions on this forum and on the AVR Freaks forum.

Offline vishalsaxenaTopic starter

  • Jr. Member
  • **
  • Posts: 23
  • Helpful? 0
Re: AVR ATmega
« Reply #3 on: June 12, 2008, 11:19:17 AM »
Thanx alot benji and pomprocker..........[:D]

Offline Admin

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,660
  • Helpful? 169
    • Society of Robots
Re: AVR ATmega
« Reply #4 on: June 16, 2008, 12:41:41 PM »
It will takes years (not hours or days) to really understand a microcontroller. There is still quite a lot that I myself still do not understand . . .

My recommendation is start a project, then just learn what you *need* to know. My $50 Robot will get you started on the very basics . . .

Offline vishalsaxenaTopic starter

  • Jr. Member
  • **
  • Posts: 23
  • Helpful? 0
Re: AVR ATmega
« Reply #5 on: June 16, 2008, 10:44:34 PM »
Thanx Admin............Yeah I already started it...........Just that I need to find a good

AVR STK serial/ ISP2 programmer...........

Ive already built MCU....... nd hv debugged it...........

nd I was seeking knowledge so that next time I can build my own MCU

without Blindly following a tutorial.........[:D]

 


Get Your Ad Here