go_away

Author Topic: Crimper Tool Part Number  (Read 2790 times)

0 Members and 1 Guest are viewing this topic.

Offline airman00Topic starter

  • Contest Winner
  • Supreme Robot
  • ****
  • Posts: 3,653
  • Helpful? 21
  • narobo.com
Crimper Tool Part Number
« on: August 30, 2008, 04:16:10 PM »
Does anyone know the part # of a crimper that functions similar to Admin's ( or is the exact product pictured)


Even if someone can tell me what type of crimper that is , that will be helpful too ( types - side entry , top entry , ratchet,  etc. )
Please part # from DigiKey.

Thanks,
Eric
Check out the Roboduino, Arduino-compatible board!


Link: http://curiousinventor.com/kits/roboduino

www.Narobo.com

Offline airman00Topic starter

  • Contest Winner
  • Supreme Robot
  • ****
  • Posts: 3,653
  • Helpful? 21
  • narobo.com
Re: Crimper Tool Part Number
« Reply #1 on: August 30, 2008, 07:21:11 PM »
I found admin's crimper's part # . Its  A25448-ND on DigiKey. Its a bit too expensive for me though - $180.
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=A25448-ND

Also, admin's can handle 18-26 AWG whereas I doubt that I will ever need to use 26 AWG wire - so I was looking through it some more and found this for $130.
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=A25159-ND

Is that a good crimper ? It has basically all the same specs as Admin's crimper except it can only do 18-24 AWG.

Thanks,
Eric

Check out the Roboduino, Arduino-compatible board!


Link: http://curiousinventor.com/kits/roboduino

www.Narobo.com

Offline vidam

  • Supreme Robot
  • *****
  • Posts: 423
  • Helpful? 1
  • Robotronics.org
Re: Crimper Tool Part Number
« Reply #2 on: August 30, 2008, 08:06:52 PM »
Eric,

Take a gander at this crimper tool. It looks just like Admin's.


-Melanie

Offline Admin

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,659
  • Helpful? 169
    • Society of Robots

Offline JonHylands

  • Expert Roboticist
  • Supreme Robot
  • *****
  • Posts: 562
  • Helpful? 3
  • Robot Builder/ Software Developer
Re: Crimper Tool Part Number
« Reply #4 on: September 01, 2008, 07:26:51 PM »

Offline airman00Topic starter

  • Contest Winner
  • Supreme Robot
  • ****
  • Posts: 3,653
  • Helpful? 21
  • narobo.com
Re: Crimper Tool Part Number
« Reply #5 on: September 01, 2008, 07:48:39 PM »
@Admin and JonHylands
Those are nice but I'd rather get a crimper with markings in AWG format
Check out the Roboduino, Arduino-compatible board!


Link: http://curiousinventor.com/kits/roboduino

www.Narobo.com

Offline Admin

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,659
  • Helpful? 169
    • Society of Robots
Re: Crimper Tool Part Number
« Reply #6 on: September 02, 2008, 04:42:03 AM »
You mean like this? ;D

My crimpers:

Offline airman00Topic starter

  • Contest Winner
  • Supreme Robot
  • ****
  • Posts: 3,653
  • Helpful? 21
  • narobo.com
Re: Crimper Tool Part Number
« Reply #7 on: September 02, 2008, 07:30:40 AM »
You mean like this? ;D

My crimpers:



yea but in the link you put up I don't think the numbers are in AWG format
Check out the Roboduino, Arduino-compatible board!


Link: http://curiousinventor.com/kits/roboduino

www.Narobo.com

Offline Admin

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,659
  • Helpful? 169
    • Society of Robots
Re: Crimper Tool Part Number
« Reply #8 on: September 02, 2008, 07:41:44 AM »
I was just looking through my really old files. This is the exact crimpers I have:
PROCRIMP TL W/DIE MR26-18
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=A25448-ND

Offline btomlinson

  • Beginner
  • *
  • Posts: 2
  • Helpful? 0
Re: Crimper Tool Part Number
« Reply #9 on: April 20, 2009, 08:46:50 AM »
Im looking for a pair of crimpers for making extentions for servos in RC aircraft. Is this the type of connectors your crimping  ?

Im going to buy a pair but I want to be 100% sure. .   TIA  ;D

 
 

Offline SmAsH

  • Supreme Robot
  • *****
  • Posts: 3,959
  • Helpful? 75
  • SoR's Locale Electronics Nut.
Re: Crimper Tool Part Number
« Reply #10 on: April 20, 2009, 09:07:37 AM »
yes those are the type, and look at the date of admins post :o please read this http://www.societyofrobots.com/robotforum/index.php?topic=602.0 awakening old posts can annoy some people on here so please try to refrain from doing it. and please search! one of the first results answered your question! http://www.societyofrobots.com/robotforum/index.php?action=search2;params=YWR2YW5jZWR8J3wwfCJ8YnJkfCd8Myw2LDIsNCw1fCJ8c2hvd19jb21wbGV0ZXwnfHwifHN1YmplY3Rfb25seXwnfHwifHNvcnR8J3xyZWxldmFuY2V8Inxzb3J0X2RpcnwnfGRlc2N8InxzZWFyY2h8J3xjcmltcGVy
« Last Edit: April 20, 2009, 09:11:12 AM by SmAsH »
Howdy

Offline btomlinson

  • Beginner
  • *
  • Posts: 2
  • Helpful? 0
Re: Crimper Tool Part Number
« Reply #11 on: April 20, 2009, 10:44:41 AM »
yes those are the type, and look at the date of admins post :o please read this http://www.societyofrobots.com/robotforum/index.php?topic=602.0 awakening old posts can annoy some people on here so please try to refrain from doing it. and please search! one of the first results answered your question! http://www.societyofrobots.com/robotforum/index.php?action=search2;params=YWR2YW5jZWR8J3wwfCJ8YnJkfCd8Myw2LDIsNCw1fCJ8c2hvd19jb21wbGV0ZXwnfHwifHN1YmplY3Rfb25seXwnfHwifHNvcnR8J3xyZWxldmFuY2V8Inxzb3J0X2RpcnwnfGRlc2N8InxzZWFyY2h8J3xjcmltcGVy


Ehhhh. . Ok, If "awaking" old posts annoys some people why not delete them so they dont show up on Google ?  Like I said, I wanted to be 100% sure of what I was buying. Ive been involved in model aviation for nearly 25 years and I have never given anyone a degrading answer to a simple question. Watch how you treat new members IMHO you need to get a life bud

Don't worry about me posting again or breaking any of the rules because I wont visit be back

Admn, thank you for taking the time to post pictures along with P/N's

Offline SmAsH

  • Supreme Robot
  • *****
  • Posts: 3,959
  • Helpful? 75
  • SoR's Locale Electronics Nut.
Re: Crimper Tool Part Number
« Reply #12 on: April 20, 2009, 04:17:49 PM »
i wasnt trying to come off as a jack ass but the reason the old topics are there are so if people need an answer they can search, and i have a life, a pretty damn good one.
Howdy

 


Get Your Ad Here