go_away

Author Topic: HERBIE  (Read 1199 times)

0 Members and 1 Guest are viewing this topic.

Offline mango1Topic starter

  • Jr. Member
  • **
  • Posts: 9
  • Helpful? 0
HERBIE
« on: September 12, 2008, 09:30:34 PM »
can someone please show me what this would look like on a breadboard?

http://downloads.solarbotics.net/misc/herbie1.gif


or even draw it on this picture with the help of paint?

http://ece-www.colorado.edu/~mathys/ecen2250/lab01/breadboard90.png

Offline Admin

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,659
  • Helpful? 169
    • Society of Robots
Re: HERBIE
« Reply #1 on: September 16, 2008, 10:28:35 AM »
Tell you what, give it a try, and we will verify it for you.

I'm confident you can do it.

A trick would be to overlay the schematic onto the breadboard, and try to get it to look as similar as possible as you wire it up.

Offline Luco

  • Beginner
  • *
  • Posts: 4
  • Helpful? 0
Re: HERBIE
« Reply #2 on: September 19, 2008, 09:15:17 AM »
Try getting the
Robot Building for Beginners
by David Cook

The book is all about building a line following robot from scratch, based on a voltage comparator. It has all the pictures and information ull need.

Offline DANNYbot

  • Jr. Member
  • **
  • Posts: 9
  • Helpful? 0
  • sleeves are for weeds ;)
Re: HERBIE
« Reply #3 on: September 23, 2008, 05:36:06 AM »
I'd also reccomend Robot Building for Beginners book- great advice :D
Make sure that the Breadboard is wired up correctly for your device, otherwise the hard
ware will not perform to its highest standard.

All the best ;)

 


Get Your Ad Here

data_list