go_away

Author Topic: Gripper for pick and place robot  (Read 3119 times)

0 Members and 1 Guest are viewing this topic.

Offline jeeproxyTopic starter

  • Beginner
  • *
  • Posts: 1
  • Helpful? 0
Gripper for pick and place robot
« on: October 09, 2008, 07:01:59 PM »
I am new to this forum. Hello everyone.

I am working on a fairly simple pick and place robot that I am going to design from scratch. The idea is that is picks up a washer and places it on a sensor that measures the washer. Then the robot makes a decision on where to place the washer.

The problem I have is that I plan to purchase a gripper, and the closest thing I have found to what I am looking for is from Lynxmotion. Here is the link to the part. I am designing everything in 3d and this company can't provide me with a drawing. So I would like to know what else is available on the market that is comparable to this gripper.

I would like to have a drawing upfront so I can see if it will work without purchasing the part.

Any input would be greatly appreciated.

Offline Admin

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,653
  • Helpful? 169
    • Society of Robots
Re: Gripper for pick and place robot
« Reply #1 on: October 12, 2008, 09:47:34 PM »
Quote
Here is the link to the part

where? :P

you can find a bunch by searching the forum and google

and most importantly:
http://www.societyofrobots.com/robot_parts_list.shtml

And although they don't provide a dimensional drawing, you can still find dimensions and specs here:
http://www.lynxmotion.com/Category.aspx?CategoryID=108#specs

 


Get Your Ad Here

data_list