Request: Convert a picture of a PCB to the following?

[MaltiK]

   

        ODB++  PREFERRED DATA ACCEPTED
            GerberX (RS 274-X) PREFERRED DATA ACCEPTED
            Gerber
            HP-GL
            Excellon
            Sieb & Meier
            DXF
            DPF (Barco)
 

Recommended file names and extensions for those who are not familiar with conventional nomenclatures.       

Single sided PCB:

                             *.top (top layer)

*.ncd (NC Drill file, plated)

*.brd (board outline)

 

                        Optional files for single layer:

                                      *.tsk (text top layer)

*.tmk (top solder mask)

*.slt (slot outline)

*.bot (bottom layer)

*.bmk (bottom solder mask)

*.bsk (bottom text layer)


http://www.ladyada.net/images/tvbgone/tvbgone11.png

[airman00]

I dont get what you want to do

[MaltiK]

Many PCB makers require that when you request for a PCB to be made, it be in a certain format, and what I want someone to do is make that format using the picture, is this possible?

[airman00]

what about the underside of the board

[Razor Concepts]

Did you get permission to copy that board?

[airman00]

Did you get permission to copy that board?

 


also, eagleCAD is the program used to transfer a schematic( in your case http://www.ladyada.net/images/tvbgone/tvbgone11.png) into a PCB design

[MaltiK]

Did you get permission to copy that board?

As soon as they post it on the internet for all to see I have the right to make my own according to that schematic as long as I am not making a profit 

And is it possible, anybody with eagle eye CAD program, can make it for me?

[airman00]

learn EagleCAD and do it yourself  , I highly doubt someone here would make an EagleCAD PCB for someone else for free.

[MaltiK]

Oh I didnt know it was really time consuming, apologies

[izua]

You'll also need the other side of the PCB. Just make another PCB yourself.

[airman00]

You'll also need the other side of the PCB. Just make another PCB yourself.

the schematic is here : http://www.ladyada.net/images/tvbgone/tvbgone11.png

[MaltiK]

You'll also need the other side of the PCB. Just make another PCB yourself.

the schematic is here : http://www.ladyada.net/images/tvbgone/tvbgone11.png

Ahhh schematics are sooo confusing, but what better time to learn than now