Author Topic: RMF Calculator, Acceleration  (Read 2192 times)

0 Members and 1 Guest are viewing this topic.

Offline tjumpTopic starter

  • Jr. Member
  • **
  • Posts: 18
  • Helpful? 0
RMF Calculator, Acceleration
« on: December 12, 2008, 08:12:23 AM »
In the Dynamics tutorial there is a section on determining desired acceleration. The instruction is to add together the horizontal-plane acceleration with the results of the incline calculation.

On the RMF Calculator, there is an entry for Desired Acceleration, and further down an entry for Angle of Incline.

My question: What value should be entered for the Desired Acceleration? The horizontal-plane acceleration (because the calculator uses the entered incline angle data to do the calculation and sum for you); or the calculated value (sum of the incline angle acceleration calculation and the horizontal-plane acceleration)?

Offline HDL_CinC_Dragon

  • Supreme Robot
  • *****
  • Posts: 1,261
  • Helpful? 5
Re: RMF Calculator, Acceleration
« Reply #1 on: December 12, 2008, 06:47:12 PM »
How fast do you want it to accelerate? 3ft/s^2? 1ft/s^2?
Just enter that in.
United States Marine Corps
Infantry
Returns to society: 2014JAN11

Offline Admin

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,660
  • Helpful? 169
    • Society of Robots
Re: RMF Calculator, Acceleration
« Reply #2 on: December 13, 2008, 08:16:21 AM »
Lets say you want it to always travel at least 5 ft/sec. Then you tell it that it must also go up a 30 degree incline. That means it will travel at 5 ft/sec at a 30 degree incline.

So if your robot was going on a horizontal plane it'll go *much* faster.

(hope that clears it up)

Offline tjumpTopic starter

  • Jr. Member
  • **
  • Posts: 18
  • Helpful? 0
Re: RMF Calculator, Acceleration
« Reply #3 on: December 15, 2008, 01:04:34 PM »
So the value placed in the Acceleration blank will be the acceleration the robot will try and hold while traveling up the incline placed in the Incline blank, correct?

Offline silo_xtreme

  • Robot Overlord
  • ****
  • Posts: 172
  • Helpful? 0
  • I really love robots, they keep me awake at night.
Re: RMF Calculator, Acceleration
« Reply #4 on: December 15, 2008, 07:33:31 PM »
That's correct!  :)

 


Get Your Ad Here