2

Author Topic: communication/control from computer using wireless (ETHERNET)  (Read 2296 times)

0 Members and 1 Guest are viewing this topic.

Offline india.robotTopic starter

  • Beginner
  • *
  • Posts: 4
  • Helpful? 0
communication/control from computer using wireless (ETHERNET)
« on: December 17, 2008, 12:01:18 PM »
hi, i want to control my robot from the compuer using the ethernet. what are the things required to achive this??

i want to develope a interface using JAVA. plz help me. thanks. i want to make the communication range of about 3 miles.

if u have any other options for communicating in this range or greater, then please say..

if possible then plz give a technique for camera communicatiion, else i have to attach an external wireless camera and attach its reciver to a TV/PC..

thanks

Offline Iron Man

  • Full Member
  • ***
  • Posts: 74
  • Helpful? 0
Re: communication/control from computer using wireless (ETHERNET)
« Reply #1 on: December 17, 2008, 06:24:41 PM »
3 miles is quite a distance.

I've looked into a bit, it depends on the restrictions in your area.

where would this robot be running?

Offline HDL_CinC_Dragon

  • Supreme Robot
  • *****
  • Posts: 1,261
  • Helpful? 5
Re: communication/control from computer using wireless (ETHERNET)
« Reply #2 on: December 17, 2008, 09:21:12 PM »
3 miles? not going to happen unless youre military or have some serious connections with some high up people. Why the need for such long distance? And video transmission at that range will be even more difficult.
United States Marine Corps
Infantry
Returns to society: 2014JAN11

Offline india.robotTopic starter

  • Beginner
  • *
  • Posts: 4
  • Helpful? 0
Re: communication/control from computer using wireless (ETHERNET)
« Reply #3 on: December 18, 2008, 03:13:11 AM »
ok.. no problem.. tell me wat is ur max range?? and how to make the interface in my computer using java and how to communicate with the robot???

thanks

Offline Admin

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,657
  • Helpful? 169
    • Society of Robots

Offline izua

  • Supreme Robot
  • *****
  • Posts: 682
  • Helpful? 0
Re: communication/control from computer using wireless (ETHERNET)
« Reply #5 on: December 27, 2008, 04:07:18 AM »
3 miles, using ethernet? Ain't going to happen. ethernet cable is limited to 100m (well, a lot of stuff limits it, that's the standard value)
Make a wireless network covering a radius of 3 miles, and set up a wireless AP on your robot.
Check out my homepage for in depth tutorials on microcontrollers and electronics.

 


Get Your Ad Here

data_list