Author Topic: stepper motor controller  (Read 3168 times)

0 Members and 1 Guest are viewing this topic.

Offline 555 timer chip guyTopic starter

  • Full Member
  • ***
  • Posts: 105
  • Helpful? 0
stepper motor controller
« on: February 26, 2007, 03:41:55 PM »
Dos any one now how to control a stepper motor with simple parts and on a tight budget :-\
« Last Edit: February 27, 2007, 06:03:16 AM by Admin »

Offline boney

  • Jr. Member
  • **
  • Posts: 16
  • Helpful? 0
Re: stepper motor controller
« Reply #1 on: March 09, 2007, 08:48:06 AM »
try this website

electronicsforu.com

they have some real simple n cool circuits

Offline Somchaya

  • Robot Overlord
  • ****
  • Posts: 180
  • Helpful? 0
  • You know it's cute!
Re: stepper motor controller
« Reply #2 on: March 09, 2007, 09:52:11 AM »
So sometime last year I built one of these controllers that let you control stepper motors via a parallel port.

http://electronics-diy.com/electronics/stepper_motors.php

They work kind of well, and all you really need is one chip, or you could just use smaller components if you really wanted to:

http://linuxgazette.net/122/sreejith.html

Hope this helps!
Somchaya - Back after a year of misc things
http://whisker.scribblewiki.com

Offline Steve Joblin

  • Supreme Robot
  • *****
  • Posts: 405
  • Helpful? 2
Re: stepper motor controller
« Reply #3 on: March 10, 2007, 07:24:26 AM »
You could use a PICAXE, a ULN2003, and four 1k resistors... you can check out the details on page 14 of Section 3 - Interfacing Circuits  manual which you can download here --> http://www.rev-ed.co.uk/docs/picaxe_manual3.pdf

Offline 555 timer chip guyTopic starter

  • Full Member
  • ***
  • Posts: 105
  • Helpful? 0
Re: stepper motor controller
« Reply #4 on: March 11, 2007, 09:31:51 AM »
thank you that rely helped  :D

 


Get Your Ad Here