go_away

Author Topic: Smartphone SPV C550 Robot Controller  (Read 1957 times)

0 Members and 1 Guest are viewing this topic.

Offline JonnyAlphaTopic starter

  • Beginner
  • *
  • Posts: 2
  • Helpful? 0
Smartphone SPV C550 Robot Controller
« on: January 26, 2009, 01:11:42 PM »
Hi,

Haven't dabbled in robotics or electronics for several years now (work took over) but before I every throw anything away or spot something electrical i always consider adding it to my robotics/electronics collections.

I upgraded my phone last year and now have an HTC P3600 (Orange SPV M700) so my old smartphone is laying idle, not worth selling on E Bay but i was wondering if it had any use in my robotics collections.

Could this smartphone be used as an onboard controller? It runs Windows CE (I think) and has a usb and headphone connector and obviously a speaker so its got a couple of inputs and outputs.

If you can run a PC using a STAMP or PIC then surely with this onboard mini computer it should be possible or is windows CE the restricting factor.   

Just a thought??

Ta

Offline msprague

  • Jr. Member
  • **
  • Posts: 35
  • Helpful? 1
Re: Smartphone SPV C550 Robot Controller
« Reply #1 on: January 26, 2009, 02:07:14 PM »
You might get some ideas from here:
http://www.wimobot.com/

I think they interface the smart phone to a microcontroller using a UART.

Michael

Offline Admin

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,659
  • Helpful? 169
    • Society of Robots
Re: Smartphone SPV C550 Robot Controller
« Reply #2 on: February 04, 2009, 08:58:46 PM »
This question has been asked a million times, controlling robots with phones and calculators.

The reality is that you don't want to cut steel with a pocket knife. Use the right tool for the right job.

A microcontroller has tons of I/O such as PWM and ADC and I2C thats perfect for controlling robots . . . a camera or a calculator has none of that.

Plus, a microcontroller (non-augmented) costs like $3!

That being said, those who did get a camera to control their robot (google for them) still had to use a microcontroller as an interface. ;D

 


Get Your Ad Here