go_away

Author Topic: 360 servo  (Read 2751 times)

0 Members and 1 Guest are viewing this topic.

Offline RadikenTopic starter

  • Jr. Member
  • **
  • Posts: 39
  • Helpful? 0
360 servo
« on: March 16, 2007, 07:13:53 AM »
I need a servo that can rotate 360 degrees, but I need to be able to position the rotation is specific places, so it can't continuously rotate.

Would it be better to:
convert a 180 degree servo I have to 360
or use a continuously rotating servo with specific time delays.

If I go with the first option, how would I convert it?
Or can I buy a 360 degree servo somewhere?
The best way to get to the top is to get off your bottom.

Offline Somchaya

  • Robot Overlord
  • ****
  • Posts: 180
  • Helpful? 0
  • You know it's cute!
Re: 360 servo
« Reply #1 on: March 16, 2007, 08:42:11 AM »
I think I've seen some 360 (or a little more) degree rotation servo (but not continuous) at ServoCity.com. I don't know if the price is worth it though.

Using a continuous and basing it off time will probably not be very accurate. Converting the 180 to a 360 would probably be better than using a continuous servo I think.
Somchaya - Back after a year of misc things
http://whisker.scribblewiki.com

Offline Admin

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,663
  • Helpful? 169
    • Society of Robots
Re: 360 servo
« Reply #2 on: March 16, 2007, 05:47:15 PM »
as Somchaya said, its probably a little pricey:
http://www.servocity.com/html/spg785_gearbox.html

you could also perhaps use a stepper motor, or a regular DC motor with an encoder for position feedback

i also remember seeing encoder kits that you can place onto servos that were modified for continuous rotation.

 


Get Your Ad Here

data_list