Author Topic: modified $50 to include motorcontroller  (Read 1172 times)

0 Members and 1 Guest are viewing this topic.

Offline kroninTopic starter

  • Jr. Member
  • **
  • Posts: 7
  • Helpful? 0
modified $50 to include motorcontroller
« on: March 22, 2009, 09:31:49 AM »
hi, after reading a few topics on the subject, i decided to try and put together a schematics that included a dc motor controller. would anyone please check and see if this might work? i am using a connector from the mega8 to the motorcontroller, so that i can disconnect it, and use servos, if i happend to find any of those ;-)
donīt pay too much attention on component values, as im just looking for confirmation that this will work (or maybe not work, but then solutions would be appreciated)

Offline Admin

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,632
  • Helpful? 169
    • Society of Robots
Re: modified $50 to include motorcontroller
« Reply #1 on: March 25, 2009, 01:54:28 AM »
Can you post us up a .png of it? (just use the export function in eagle)

This way we don't have to require eagle or be bothered to load it up.

Also, if you followed the datasheets correctly, it will work :P

Offline kroninTopic starter

  • Jr. Member
  • **
  • Posts: 7
  • Helpful? 0
Re: modified $50 to include motorcontroller
« Reply #2 on: March 27, 2009, 11:22:24 AM »
Sorry for the late reply, but iīve been busy
hereīs the PNG.

Offline superchiku

  • Supreme Robot
  • *****
  • Posts: 953
  • Helpful? 5
  • cooll
Re: modified $50 to include motorcontroller
« Reply #3 on: March 27, 2009, 12:19:43 PM »
will work ..bu u have tochange the source code
JAYDEEP ...

IT AND ROBOTICS ENGINEER

"IN THE END IT DOESNT EVEN MATTER"

Offline kroninTopic starter

  • Jr. Member
  • **
  • Posts: 7
  • Helpful? 0
Re: modified $50 to include motorcontroller
« Reply #4 on: March 27, 2009, 02:37:14 PM »
Thanks  - fortunately, i know a C / C+ Wiz kid, so coding will not be the biggest problem, but heīs not at all into the electric/mechanical stuff so thatīs the part where iīm going solo.
I wouldnīt continue with the dc controller, if any one of you told me that it wouldnīt work, but i take it as i can continue my work

 


Get Your Ad Here

data_list