2

Author Topic: X,Y,Z axis usb servo?  (Read 1331 times)

0 Members and 1 Guest are viewing this topic.

Offline SymanticTopic starter

  • Beginner
  • *
  • Posts: 3
  • Helpful? 0
X,Y,Z axis usb servo?
« on: March 26, 2009, 09:45:33 PM »
Hi, im not a mechanical engineer, i tend to stay more to the software.

I need a base of some sort that i could add components on (small, maby 4"X4") and i need this to move fast.

It would idealy be controlled via USB port.

Something like a joystick operated camera stand, but without the camera. I have my own that i would mount.

Any ideas that would be great.

Also i could reverse engineer the USB connection if necessary.

Thank you

-Henry

Offline Admin

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,657
  • Helpful? 169
    • Society of Robots
Re: X,Y,Z axis usb servo?
« Reply #1 on: April 10, 2009, 12:35:42 AM »
I am guessing you are asking how to build a robot chassis?

two links to start reading:
http://www.societyofrobots.com/step_by_step_robot_step2.shtml
http://www.societyofrobots.com/mechanics_chassisconstruction.shtml

You can also buy and hack an RC chassis if you don't want to spend too much time on hardware.

 


Get Your Ad Here

data_list