2

Author Topic: Full GUI Software for USBasp compatible Programmer  (Read 7557 times)

0 Members and 1 Guest are viewing this topic.

Offline avinashTopic starter

  • Beginner
  • *
  • Posts: 2
  • Helpful? 0
Full GUI Software for USBasp compatible Programmer
« on: May 10, 2009, 04:09:53 AM »
Hello Friends,

I have recently written a GUI Software for driving USBasp compatible USB Programmers. It is much easier to use than the avrdude or avrdude-gui.

You can download it free of cost from here

http://extremeelectronics.co.in/avr-tutorials/gui-software-for-usbasp-based-usb-avr-programmers/

[size=18]Screen Shots[/size]

Offline avinashTopic starter

  • Beginner
  • *
  • Posts: 2
  • Helpful? 0

Offline ankshah13

  • Jr. Member
  • **
  • Posts: 16
  • Helpful? 0
Re: Full GUI Software for USBasp compatible Programmer
« Reply #2 on: July 16, 2013, 02:33:01 AM »
Thanks a million for your software. It works very well and I could successfully program an atmega8 for the 50$ robot. It's much better than avrdude. There is just one extremely small problem in it. ( I wouldn't be saying this if I did not care about making the software better). The program stops working whenever the hex file loads successfully. This happened twice and then I could program my chip. Otherwise, this is an AWesome software and I heartily thank you for posting this on the forum.

 


Get Your Ad Here

data_list