go_away

Author Topic: Resistors?  (Read 1088 times)

0 Members and 1 Guest are viewing this topic.

Offline xCycloneTopic starter

  • Jr. Member
  • **
  • Posts: 26
  • Helpful? 0
  • I am a noob at robot =P
Resistors?
« on: May 17, 2009, 07:56:06 AM »
I am building the 50 dollar robot and I bought some resistors from Radio Shack. I needed 1.62 Kohm and a 340 ohm, but they only had 1.5 Kohm and 330 ohm. Would that make much of a difference ???
Logged
ROBOTS WILL ONE DAY PWN THE WORLD... maybe.

Offline xCycloneTopic starter

  • Jr. Member
  • **
  • Posts: 26
  • Helpful? 0
  • I am a noob at robot =P
Re: Resistors?
« Reply #1 on: May 17, 2009, 08:03:27 AM »
I found out more about the 330 via SoR fourm but... I still need help about the 1.62Kohm vs. 1.5Kohm
Logged
ROBOTS WILL ONE DAY PWN THE WORLD... maybe.

Offline LunchBox!

  • Jr. Member
  • **
  • Posts: 11
  • Helpful? 2
Re: Resistors?
« Reply #2 on: May 17, 2009, 09:35:57 AM »
depending on the tolerance band of the 1.62 the 1.5 should be fine.

its most likely a + or - 10% (silver band)

1.62 x 10% = 0.162
1.62 - 0.162 = 1.458

measure ur 1.5's and pick the one with the highest value.
« Last Edit: May 17, 2009, 09:49:02 AM by LunchBox! »
Logged

Offline Admin

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,585
  • Helpful? 169
    • Society of Robots
Re: Resistors?
« Reply #3 on: May 30, 2009, 09:31:57 AM »
You'll be fine.
Logged

Offline xCycloneTopic starter

  • Jr. Member
  • **
  • Posts: 26
  • Helpful? 0
  • I am a noob at robot =P
Re: Resistors?
« Reply #4 on: May 31, 2009, 07:04:15 AM »
Ok good thank you both!
Logged
ROBOTS WILL ONE DAY PWN THE WORLD... maybe.
 

Related Topics

  Subject / Started by Replies Last post
14 Replies
973 Views 		Last post July 06, 2010, 08:45:13 PM
by RS232
9 Replies
1182 Views 		Last post August 07, 2011, 10:46:24 PM
by z.s.tar.gz
5 Replies
506 Views 		Last post January 27, 2012, 07:30:25 PM
by Gertlex
3 Replies
537 Views 		Last post May 09, 2012, 02:06:29 PM
by jkerns


Get Your Ad Here