Author Topic: How many Volt is needed? (Read 4284 times)

sotu · « **on:** April 07, 2007, 09:01:57 AM »

Im making a 2 wheeled robot. I haven't started yet but im thinking of a small 2 wheeled robot, not heavy at all. Im just wondering: Should i buy two 6 V motors or two of this options: 1,5 V, 3 V, 4,5 V or as said 6 V??

Hal9000 · « **Reply #1 on:** April 07, 2007, 11:33:47 AM »

I think 3v is what a lot of people use for smaller robots.

Thing is, since most other circuitry uses 5v, then this makes sense to use a 3v motor because you are stressing it a bit, yeah, but it's light.

Normally you would want to be getting one of these with a gearbox on, because they spin quite fast usually

Like this: http://www.pololu.com/products/tamiya/0061/

sotu · « **Reply #2 on:** April 08, 2007, 04:07:35 AM »

Yeah but on those u need 4 wires connected to them!:(

sotu · « **Reply #3 on:** April 08, 2007, 05:55:44 AM »

I prefer 2 for turning and 2 for drifting

Hal9000 · « **Reply #4 on:** April 08, 2007, 08:20:37 AM »

Normally each motor needs two connections.

sotu · « **Reply #5 on:** April 08, 2007, 09:43:25 AM »

I know but a servo needs 3

ed1380 · « **Reply #6 on:** April 08, 2007, 10:21:26 AM »

The reason a servo has three is because it has a small circuit board in there, and needs the third wire to know how far to turn

sotu · « **Reply #7 on:** April 13, 2007, 12:32:11 PM »

Im thinking of ordering one of those..

Hal9000 · « **Reply #8 on:** April 13, 2007, 03:41:19 PM »

Yeah, if you follow the $50 robot tutorial, that should be easier.

sotu · « **Reply #9 on:** April 15, 2007, 06:59:32 AM »

I got no eletric circuit knowlodge what's so ever. All i want is either a kit with a manuel on how to put ure own circuit card together or to learn where to wire the wires on a finish made circuit card so i know how to do it and can then buy a finish circuit card and use the knowledge i learned in the kit. Im googleing and googleing but i cant find anything

I dont care if i can learn how to put the wires on a circuit card stashed with all the pieces needed or to buy a empty circuit card and put on all the things needed for a cicruit card...PLEASE i need links..! If u dont understand what im saying then say what u dont understand. I'll be happy to explain u!

Hal9000 · « **Reply #10 on:** April 15, 2007, 07:46:57 AM »

Well, if you're not understanding the robot builder's bonanza, i can't really think of much you could really buy.

Like, what's the point of puttint together a robot if you don't know how it works? My dad got me one ages ago...........I put it together. Great. I was as bored as a doorknob.

Sotu, you are at the most interesting stage of robot bulding

I would be suprised if robots like this http://www.pololu.com/products/robots.html aren't exactly what you are looking for. But, as I say again, what's the point?

sotu · « **Reply #11 on:** April 15, 2007, 08:08:12 AM »

I have been visiting the link u gave me before u posted it. And have decided to buy one of those kits. But what u dont learn is how to put the car together. But i will learn how to wire up the wires and where to wire them so i will be able to make a much better robot after this!

Hal9000 · « **Reply #12 on:** April 15, 2007, 08:10:03 AM »

Yeah, they will have instructions. Good luck.

ed1380 · « **Reply #13 on:** April 15, 2007, 11:16:34 AM »

Don't cut and paste your questions to all threads, like this.
see it's anoying.
use google.

sotu · « **Reply #14 on:** April 15, 2007, 01:36:33 PM »

Admin · « **Reply #15 on:** April 16, 2007, 11:00:32 AM »

try searching for 'microcontroller' both in this forum and on google.
tons can be found here, too:
http://www.societyofrobots.com/robot_parts_list_microcontrollers.shtml

ive never heard of 'circuit card' . . .

as for choosing a motor, dont choose on voltage unless you have battery limitations. instead, choose a motor based on torque and rpm.

sotu · « **Reply #16 on:** April 16, 2007, 01:55:47 PM »

Quote from: Admin on April 16, 2007, 11:00:32 AM

ive never heard of 'circuit card' . . .

Circuit card (That's what im calling it):

ed1380 · « **Reply #17 on:** April 16, 2007, 02:11:45 PM »

I think he means pcb board

sotu · « **Reply #18 on:** April 17, 2007, 07:50:51 AM »

Ok im just used to call it circuit card because its directly transmitted from norwegian!

News:

Author Topic: How many Volt is needed? (Read 4284 times)

Related Topics