I am not sure of myself so I hope noone minds that I ask some real basic things about constructing the PCB in Step 3 of the $50 Bot.
I have the DIP socket, 3X6, 3X5, and the 2X5 male header pins soldered in place. As I understand it of the 6 pins closest to DIP socket get attached to pins directly across from them on the socket one to one 23-28. The 5 pins closest to the DIP socket also get attached in the same manner one to one 2-6.
Q1 What is the manner of attachment, fill-in with solder, make small jumpers or what else did I not see in the picture?
Q2 The Programmer Head pins go to location across the board I am think I need jumper wires for them, do I tin them and attach them to the pins as called out?
Thanks ahead of time for putting up with me.