Thanks for the replies
Ok so, the setup I have is the SSC-32 Servo Controller from Lynxmotion http://www.lynxmotion.com/Product.aspx?productID=395&CategoryID=52
The sequencer softwarehttp://www.lynxmotion.com/Product.aspx?productID=443&CategoryID=15
This will be my first project so I'm keeping it simple by building an Arm, just to get everything up and running using the serial cable. Well, at least it sounds simple..... I'm ok with the mechanical construction, the board connects to PC via serial cable and the script is automatically generated thanks to the software(Still getting into that) I do want to achieve a wireless connection just to push the boundaries
I have this thing about wires and it will be more of an achievement if the project is a stand alone device. Especially for my next goal......a humanoid. I appreciate the help from anyone that can advise in regards to a Wireless connection.
First of all I found the direction to the Zigbee modules very interesting, thanks again. This is gonna open a new book of Q's
Still on the Bluetooth:
Does bluetooth operate on a radio frequency like the Zigbee modules?
The USB Bluetooth Dongle into PC I understand. Pretty straight forward plug n play USB device into PC and works with Windows.
The RS232 Bluetooth adapter on the other hand I'm not sure of....I foundhttp://www.brainboxes.com/product/bluetooth/BL-819.aspx
Just not sure about the 'option to power from pin 9' . Will the board power this device?
Will this setup above work?
Do you need 2 of these modules to communicate? Or could one communicate With a wireless LAN card on the PC?
Thanks in advance for any advice