I'm trying out xbee for the first time. I've done the configuration as below on X-CTU;
- make PAN ID the same for both nodes.
- set one node as a ZIGBEE COORDINATOR AT, and the other as the ZIGBEE ROUTER / END DEVICE AT.
The coordinator is connected to the PC running X-CTU, and the end device is connected to a PIC constantly sending out data.
The coordinator node doesn't seem to be able to receive any data from the end device node. The TX LED on the end device keeps blinking, showing that data is kept being sending out. But the RX LED on both nodes never turned on. And so nothing comes out on the X-CTU terminal.
Anyone has any ideas what's wrong with my setup?