2

Author Topic: autonomous "GRID FOLLOWING ROBOT"  (Read 3519 times)

0 Members and 1 Guest are viewing this topic.

Offline salauddin786Topic starter

  • Beginner
  • *
  • Posts: 1
  • Helpful? 0
autonomous "GRID FOLLOWING ROBOT"
« on: September 17, 2009, 03:44:54 PM »
i am working to build an autonomous "GRID FOLLOWING ROBOT".microcontroller used by me is ATmega8.and the wireless communication module used is cc2500.the program should be developed in such a logic that ,"when the coordinate e.g.(1,2) as 0x12 then the robot should follow some suitable path to  reach that coordinate.plz ... i need help in developing the code.

Offline ksquared

  • Jr. Member
  • **
  • Posts: 41
  • Helpful? 0
Re: autonomous "GRID FOLLOWING ROBOT"
« Reply #1 on: September 19, 2009, 11:14:30 AM »
Gooday, you may do well to expound a little on the physical design of your 'bot, so that people may better know what we have to work with.  I know a little about programming, but I'm not sure if I can help until at least know how your robot detects the lines.

By the way, that is just a cool idea... I think I might try to build that myself!
« Last Edit: September 19, 2009, 11:19:24 AM by ksquared »

 


Get Your Ad Here

data_list