Author Topic: How to connect dc motor with L298N  (Read 2646 times)

0 Members and 1 Guest are viewing this topic.

Offline mohit sharmaTopic starter

  • Jr. Member
  • **
  • Posts: 28
  • Helpful? 0
How to connect dc motor with L298N
« on: October 06, 2009, 10:17:20 AM »
i want to connect a dc motor with L298N . Please help me i cant understand pin description in datasheet . What does current sensing, enable and logic supply pin means.

Offline Soeren

  • Supreme Robot
  • *****
  • Posts: 4,672
  • Helpful? 227
  • Mind Reading: 0.0
Re: How to connect dc motor with L298N
« Reply #1 on: October 06, 2009, 04:52:41 PM »
Hi,

Logic supply is the voltage that drives the logic/microcontroller - usually 5V or 3.3V,
Current sensing is well... Sensing the current through the motor (driven by a higher voltage than your logics) to keep a max. on the current. If eg. a stepper motor is used, this keeps it from burning the windings at stand still (if properly calculated).
Regards,
Søren

A rather fast and fairly heavy robot with quite large wheels needs what? A lot of power?
Please remember...
Engineering is based on numbers - not adjectives

 


Get Your Ad Here

data_list