Author Topic: Attaching things to ball bearings  (Read 2457 times)

0 Members and 1 Guest are viewing this topic.

Offline ksquaredTopic starter

  • Jr. Member
  • **
  • Posts: 41
  • Helpful? 0
Attaching things to ball bearings
« on: November 22, 2009, 10:58:26 PM »
Let us say I have a run of the mill ball bearing (inner ring, outer ring.)  Does anyone know how exactly you are supposed to mount stuff to the inner ring?  And yes, I mean axles, I suppose, but any ideas are welcome.

Thanks alot.

Offline Soeren

  • Supreme Robot
  • *****
  • Posts: 4,672
  • Helpful? 227
  • Mind Reading: 0.0
Re: Attaching things to ball bearings
« Reply #1 on: November 23, 2009, 05:44:14 PM »
Hi,

Either by a very(!) tight fit, or by clamping it between bushings matching the diameter of the inner ring.
(Glue might help if the fit is less tight).
Regards,
Søren

A rather fast and fairly heavy robot with quite large wheels needs what? A lot of power?
Please remember...
Engineering is based on numbers - not adjectives

 


Get Your Ad Here