Author Topic: printing from eagle  (Read 2582 times)

0 Members and 1 Guest are viewing this topic.

Offline cooldogTopic starter

  • Supreme Robot
  • *****
  • Posts: 751
  • Helpful? 4
  • be nice to nerds, one day they will be your boss
printing from eagle
« on: December 04, 2009, 09:56:07 AM »
so i got a eagle board done. and i want to print it. it is two sided. how do u guys print it so that only the bottom layer is printed or only the top?

i tried changing viable layers but the boards came out different sizes.
robot will rule the world and i will be building them
-admin

favorite web sites
http://www.societyofrobots.com/
http://www.instructables.com/

Offline TrickyNekro

  • Contest Winner
  • Supreme Robot
  • ****
  • Posts: 1,207
  • Helpful? 15
  • 1.6L Peugeot 307 tuner
Re: printing from eagle
« Reply #1 on: December 07, 2009, 05:25:53 PM »
Noway, unless you change the scale factor there is no way that gonna happen,
check the frame side of the two boards, if it's the same
For whom the interrupts toll...


P.S. I've been inactive for almost a year... Don't give promises but I'll try to complete my tutorials. I'll let you know when..

Cheers!

Offline Trumpkin

  • Supreme Robot
  • *****
  • Posts: 1,177
  • Helpful? 5
Re: printing from eagle
« Reply #2 on: December 07, 2009, 07:54:19 PM »
Here's a tutorial I found for printing out Eagle boards, http://www.cnczone.com/forums/showthread.php?t=33374 a bit over complicated but it works just fine. I printed out two layers of a circuit following this tutorial and it came out the same size.
Robots are awesome!

Offline cooldogTopic starter

  • Supreme Robot
  • *****
  • Posts: 751
  • Helpful? 4
  • be nice to nerds, one day they will be your boss
Re: printing from eagle
« Reply #3 on: December 07, 2009, 08:23:56 PM »
thanks :) ill give it a try
robot will rule the world and i will be building them
-admin

favorite web sites
http://www.societyofrobots.com/
http://www.instructables.com/

Offline Admin

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,659
  • Helpful? 169
    • Society of Robots
Re: printing from eagle
« Reply #4 on: December 08, 2009, 11:56:30 PM »
http://www.societyofrobots.com/electronics_Eagle_export_tutorial.shtml

Each file represents a different part of the board. Just look up which ones represent the upper layer.

Or if you meant printing with a paper printer, just turn off the layers you don't want to see (in the top drop down menu).

 


Get Your Ad Here

data_list