Author Topic: reciver wiring  (Read 2448 times)

0 Members and 1 Guest are viewing this topic.

Offline TravelingPencilTopic starter

  • Jr. Member
  • **
  • Posts: 31
  • Helpful? 0
reciver wiring
« on: April 29, 2007, 05:18:40 PM »
does anyone know how to wire a reciver so that you don't have to use up one channel for a battery? ???

Offline jshalcott

  • Full Member
  • ***
  • Posts: 50
  • Helpful? 0
  • The Party Has Arived
Re: reciver wiring
« Reply #1 on: April 29, 2007, 06:38:34 PM »
there should be an extra hole for the battery, so if it was a three channel reciever there would be four slots. sometimes there are labled channel 1, channel 2, etc, and the top one will say BATT
DONT DO DRUGS!!!!

Offline TravelingPencilTopic starter

  • Jr. Member
  • **
  • Posts: 31
  • Helpful? 0
Re: reciver wiring
« Reply #2 on: April 29, 2007, 07:44:59 PM »
well on some recivers the first channel is labeled:  Channel 1/Batt :(

Offline ed1380

  • Supreme Robot
  • *****
  • Posts: 1,478
  • Helpful? 3
Re: reciver wiring
« Reply #3 on: April 29, 2007, 08:06:31 PM »
hook the battery wires and reciever plug ghetto wise. or make the cable and battery wires share a header plug
Problems making the $50 robot circuit board?
click here. http://www.societyofrobots.com/robotforum/index.php?topic=3292.msg25198#msg25198

Offline Admin

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,666
  • Helpful? 169
    • Society of Robots
Re: reciver wiring
« Reply #4 on: April 30, 2007, 04:55:58 PM »
if for some odd reason it doesnt have a battery plug port, just use a Y harness.

this cable has three ends, one for your reciever, one for your battery, and one for your servo. make sure the power line goes all three ways . . .

Offline TravelingPencilTopic starter

  • Jr. Member
  • **
  • Posts: 31
  • Helpful? 0
Re: reciver wiring
« Reply #5 on: April 30, 2007, 05:41:05 PM »
thanks, i'm building a wireless land style trainer for a teathered mini ROV for use when we go camping at a lake. :)

 


Get Your Ad Here

data_list