go_away

Author Topic: Parallax Revolution  (Read 4015 times)

0 Members and 1 Guest are viewing this topic.

Offline 555 timer chip guyTopic starter

  • Full Member
  • ***
  • Posts: 105
  • Helpful? 0
Parallax Revolution
« on: April 30, 2007, 08:53:02 AM »
I Have seen the light and I am going to switch over to another company but which one, could some one point me in the direction of a company that sells good microcontrollers (preferably programed in PBASIC)

Offline Hal9000

  • Supreme Robot
  • *****
  • Posts: 338
  • Helpful? 0
Re: Parallax Revolution
« Reply #1 on: April 30, 2007, 09:20:41 AM »
Doesn't pbasic come from parallax, in which case I think it is made for parallax microcontrollers only. I do not know.

I should imagine that most popular microcontrollers (AVR, 8051, PIC, ARM) have some sort of programming language which is similar to BASIC, which I am guessing PBASIC is based on.

I myself have never programmed in basic, so a load of other SoR members may be able to help

http://www.amazon.com/PIC-Microcontroller-Project-Book-Compliers/dp/0071437045/sr=8-1/qid=1167610619?ie=UTF8&s=books

this one was reccomended by another SoR user. It has a BASIC facet to it.
"The truth is, you can't hide from the truth, cos the truth is all there is" - Handsome Boy Modeling School

Offline 555 timer chip guyTopic starter

  • Full Member
  • ***
  • Posts: 105
  • Helpful? 0
Re: Parallax Revolution
« Reply #2 on: April 30, 2007, 10:17:52 AM »
Doesn't pbasic come from parallax, in which case I think it is made for parallax microcontrollers only. I do not know.

microchip makes one of parallax basic stamp interpreter chips the PIC16C56A for there basic stamp one.

But what determines what a chip is programed in and how can I find :-[


Offline nanob0t

  • Robot Overlord
  • ****
  • Posts: 145
  • Helpful? 0
  • Trust Your Technolust
Re: Parallax Revolution
« Reply #3 on: April 30, 2007, 10:46:15 AM »
Here's a line of microcontrollers.  They are quite pricy, but they are very easy to program and are done in BASIC.  They aren't done in PBASIC, but you could do a little learning and get it down.  I used them with my friend and they are very easy, and have a good debugger with them that makes data collecting very easy. 

http://www.basicmicro.com/

You can also get a robot board, so you don't have to build anything from:

http://www.lynxmotion.com/Category.aspx?CategoryID=66

If you really get into robotics, you may begin to find BASIC quite limiting.  I found that out a while ago.  If you don't mind learning another programming language, I'd go with PICs  ;D


I hope this helps.

Offline 555 timer chip guyTopic starter

  • Full Member
  • ***
  • Posts: 105
  • Helpful? 0
Re: Parallax Revolution
« Reply #4 on: April 30, 2007, 12:05:24 PM »
thanks

 


Get Your Ad Here

data_list