Don't ad-block us - support your favorite websites. We have safe, unobstrusive, robotics related ads that you actually want to see - see here for more.
0 Members and 1 Guest are viewing this topic.
Nice! I didn't had time to do much lately. Too much work, I get home late and tired. I'll try to speed things up a bit, but anyway, I'm using Windows, can't help you too much on the Mac side. I'm glad you managed to make it work with the help from the forum.
So you need the servos to not receive signals during programming with the hardware programmer or to not be powered during that time? If you just don't want them to be powered, remove the Vselect jumper J1, same like J2.
I never use the hardware programmer, just the FTDI board. So you need the servos to not receive signals during programming with the hardware programmer or to not be powered during that time? If you just don't want them to be powered, remove the Vselect jumper J1, same like J2.Edit: you can use this program to upload hex files using the FTDI cable. Oh, while typing I remembered that you use a Mac... Perhaps there is a similar program for Macs?