Author Topic: Use closed loop stepper motors instead of open loop stepper motors  (Read 2795 times)

0 Members and 1 Guest are viewing this topic.

Offline ben25Topic starter

  • Beginner
  • *
  • Posts: 1
  • Helpful? 0
Hello everyone,
My 3D printer has a slow printing speed. Once the speed is increased, the motor will easily lose synchronization, and the accuracy and success rate will drop significantly. If I want to solve these problems, can I use a closed loop stepper motor instead of an open loop stepper motor? A motor similar to this: https://www.oyostepper.de/goods-533-Nema-17-Closed-Loop-Schrittmotor-09-Grad-44-Ncm-mit-Encoder-1000CPR-Schrittmotoren-mit-Geschlossenem-Regelkreis.html

 


data_list