Author Topic: robotic arm position overtravel  (Read 1704 times)

0 Members and 1 Guest are viewing this topic.

Offline engr1Topic starter

  • Beginner
  • *
  • Posts: 1
  • Helpful? 0
robotic arm position overtravel
« on: January 07, 2015, 11:54:28 AM »
How is this done, by a software limit, limit overtravel switch??

Offline mklrobo

  • Supreme Robot
  • *****
  • Posts: 558
  • Helpful? 15
  • From Dream to Design at the speed of Imagination!
Re: robotic arm position overtravel
« Reply #1 on: January 21, 2015, 04:39:07 PM »
 :) Hello!
Definitely need more information. If limit switch, the
switch is physically on the shaft.( could be infrared, SPST, potentiometer, etc)
If a software limit, the motor is of concern. Servo's can be tracked
in the distance they go, by the number of pulses given. A formula is
given on your ordered servo to compute the distance, or degrees.
Good luck! ;D

Offline bdeuell

  • Robot Overlord
  • ****
  • Posts: 189
  • Helpful? 15
Re: robotic arm position overtravel
« Reply #2 on: January 21, 2015, 09:55:39 PM »
it is common to design systems that use both. i.e. a software limit is used as the primary limit and the hard/limit switch is used as a safeguard.

 


Get Your Ad Here

data_list