go away spammer

Author Topic: need help modifying a servo  (Read 3742 times)

0 Members and 1 Guest are viewing this topic.

Offline ***bacon***Topic starter

  • Beginner
  • *
  • Posts: 6
  • Helpful? 0
need help modifying a servo
« on: March 25, 2009, 03:57:21 PM »
OK i am building the 50$ ROBOT AND THE TUTORIAL ON MODIFYING THE SERVOS SAYS TO REMOVE THE PART THAT KEEPS THE POTHEAD SPINNING WITH THE GEARS, BUT i am using the HS-311 and that part is not separate from the main gear, it is all one piece. What do i do?                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 thanks, ***bacon***                           

Offline pomprocker

  • Supreme Robot
  • *****
  • Posts: 1,431
  • Helpful? 16
  • Sorry miss, I was giving myself an oil-job.
    • Nerdcore - Programming, Electronics, Mechanics
Re: need help modifying a servo
« Reply #1 on: March 25, 2009, 04:01:05 PM »
glue the pothead and sand (not clip) the stop on the main gear

 


Get Your Ad Here

data_list