Author Topic: Transducers  (Read 4882 times)

0 Members and 1 Guest are viewing this topic.

Offline RoboTopic starter

  • Jr. Member
  • **
  • Posts: 8
  • Helpful? 0
Transducers
« on: April 29, 2006, 08:59:37 PM »
Looking for small, cheap, ultrasonic transducers.  Do the systems that use two, (Transmitter & Receiver) give better range/performance than those that use the same transducer for both T & R?  I want to detect a human at about 25 feet.  -- Thanks for any and all info.

Offline Admin

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,703
  • Helpful? 173
    • Society of Robots
Re: Transducers
« Reply #1 on: April 30, 2006, 07:58:42 AM »
Hmmm 25ft is really far for a sensor . . .

These are the best transducers I can find at 18ft
http://www.acroname.com/robotics/parts/R241-SRF10.html
http://www.acroname.com/robotics/parts/R145-SRF08.html

This one claims 35 ft
http://www.acroname.com/robotics/parts/R11-6500.html
You will need to buy a transducer to go with that.

What I think would be better for you is a PIR that they use in buglar systems
http://home.howstuffworks.com/question238.htm

My best recommendation is buying one of these motion sensors, and hacking them for the output.
http://froogle.google.com/froogle?sourceid=navclient&ie=UTF-8&rls=DGUS,DGUS:2006-11,DGUS:en&q=passive%20human%20motion%20detector&sa=N&tab=wf

Many of them have a built in light/alarm sound that turns on only when it detects motion. Just connect your circuit to the light/speaker wiring.

If you decide to do this, feel free to post pics and other info here when you can!
« Last Edit: April 30, 2006, 08:00:35 AM by Admin »

Offline RoboTopic starter

  • Jr. Member
  • **
  • Posts: 8
  • Helpful? 0
Re: Transducers
« Reply #2 on: April 30, 2006, 08:57:56 AM »
Thanks, Admin.  --  I was using IR, however I now want to determine whether they are coming or going.  By using ultrasonics I have Doppler information that I don’t have otherwise.

 


Get Your Ad Here