Author Topic: $50 robot where to start?  (Read 6719 times)

0 Members and 1 Guest are viewing this topic.

Offline RevlexTopic starter

  • Jr. Member
  • **
  • Posts: 16
  • Helpful? 0
$50 robot where to start?
« on: January 08, 2010, 03:22:26 AM »
I have a question, iv'e looked on the forum and Google but couldnt find it!

Here's my question:

How do i know what electronics i need and built a correct circuit for the robot. for instance take the €50 robot tutorial wich dates from somewhere in 2008..........
the tutorial  says i need this, that and a thingybob more of flash memory and stuff, since it's outdated now. How do i know what i need to buy?:O

So if some one could tell me that i would be so happy!!!!

greeets,

A Dutch Man

Offline SmAsH

  • Supreme Robot
  • *****
  • Posts: 3,959
  • Helpful? 75
  • SoR's Locale Electronics Nut.
Re: $50 robot where to start?
« Reply #1 on: January 08, 2010, 04:13:52 AM »
Well, the only real thing that can be outdated is the microcontroller.
The upgrades for this are the atmega168 and the atmega328.
The 328 has the most flash memory etc...
Howdy

Offline RevlexTopic starter

  • Jr. Member
  • **
  • Posts: 16
  • Helpful? 0
Re: $50 robot where to start?
« Reply #2 on: January 08, 2010, 04:46:52 AM »
does the new types of microcontroller need a other circuit bord since it's not the same?

Offline SmAsH

  • Supreme Robot
  • *****
  • Posts: 3,959
  • Helpful? 75
  • SoR's Locale Electronics Nut.
Re: $50 robot where to start?
« Reply #3 on: January 08, 2010, 04:53:16 AM »
The pinout connector is the same. Nothing externally is different, its an exact switchout for the mega8.
The only difference is the defines in the code. Instead of defining the mega8 you do the mega168/328.
Howdy

Offline RevlexTopic starter

  • Jr. Member
  • **
  • Posts: 16
  • Helpful? 0
Re: $50 robot where to start?
« Reply #4 on: January 08, 2010, 04:57:18 AM »
than you SmAsh for the help:)


Edit: It may be sound stupid but where can i find the refrence list of the connectors of the old controler and te new?
« Last Edit: January 08, 2010, 04:59:57 AM by Revlex »

Offline SmAsH

  • Supreme Robot
  • *****
  • Posts: 3,959
  • Helpful? 75
  • SoR's Locale Electronics Nut.
Re: $50 robot where to start?
« Reply #5 on: January 08, 2010, 05:02:51 AM »
You mean a labeled diagram type thing?
Howdy

Offline RevlexTopic starter

  • Jr. Member
  • **
  • Posts: 16
  • Helpful? 0
Re: $50 robot where to start?
« Reply #6 on: January 08, 2010, 05:04:03 AM »
ya or technical information about the pins so i can do some research to them:)

Offline SmAsH

  • Supreme Robot
  • *****
  • Posts: 3,959
  • Helpful? 75
  • SoR's Locale Electronics Nut.
Re: $50 robot where to start?
« Reply #7 on: January 08, 2010, 05:06:40 AM »
The 8/168/328 are all the same as this.
Howdy

Offline RevlexTopic starter

  • Jr. Member
  • **
  • Posts: 16
  • Helpful? 0
Re: $50 robot where to start?
« Reply #8 on: January 08, 2010, 05:09:52 AM »
Thnx DUDE!!!!

now am i going to make the €50 robot instead of the $50 robot:P

Offline Joker94

  • Supreme Robot
  • *****
  • Posts: 1,119
  • Helpful? 26
Re: $50 robot where to start?
« Reply #9 on: January 08, 2010, 05:13:03 AM »
make sure you get the 28 pin mcu as the 168 can come in a 32 pin format. I am not sure about the 328 though.

Joker94

Offline RevlexTopic starter

  • Jr. Member
  • **
  • Posts: 16
  • Helpful? 0
Re: $50 robot where to start?
« Reply #10 on: January 08, 2010, 05:16:52 AM »
Ok it could be just me but since jokers post........ im confused about the pins and the shortnames like MCU

Offline SmAsH

  • Supreme Robot
  • *****
  • Posts: 3,959
  • Helpful? 75
  • SoR's Locale Electronics Nut.
Re: $50 robot where to start?
« Reply #11 on: January 08, 2010, 05:19:25 AM »
"MCU" just means microcontroller. He means to be sure you are getting the chip in dip form.
When you buy, make sure it says dip somewhere.
Howdy

Offline RevlexTopic starter

  • Jr. Member
  • **
  • Posts: 16
  • Helpful? 0
Re: $50 robot where to start?
« Reply #12 on: January 08, 2010, 05:24:08 AM »
ok tnx, Im going to do some home work with those short names..

Offline RevlexTopic starter

  • Jr. Member
  • **
  • Posts: 16
  • Helpful? 0
Re: $50 robot where to start?
« Reply #13 on: January 08, 2010, 11:32:34 AM »
since it's hard in europe to find some stuff is this a atmega328 28 -pin dip? since i'm getting confused with the name ATMEGA328p-PU.


http://shop.tuxgraphics.org/electronic/detail_atmega328.html?id=2067bf#atmega328

Offline Webbot

  • Expert Roboticist
  • Supreme Robot
  • *****
  • Posts: 2,165
  • Helpful? 111
    • Webbot stuff
Re: $50 robot where to start?
« Reply #14 on: January 08, 2010, 12:05:52 PM »
Yep - thats what you need
Webbot Home: http://webbot.org.uk/
WebbotLib online docs: http://webbot.org.uk/WebbotLibDocs
If your in the neighbourhood: http://www.hovinghamspa.co.uk

Offline RevlexTopic starter

  • Jr. Member
  • **
  • Posts: 16
  • Helpful? 0
Re: $50 robot where to start?
« Reply #15 on: January 09, 2010, 04:35:30 AM »
Evrey body tnx for your help!!!