Don't ad-block us - support your favorite websites. We have safe, unobstrusive, robotics related ads that you actually want to see - see here for more.
0 Members and 1 Guest are viewing this topic.
if i change the optimization to 1, it will exit any loop and start over from main.
Note that the compiler will ignore delay_cycles if you turn on compiler optimization.
for(int i=0; i<10000;i++){}
note that is says this in the documentation
I have try using delay_ms(1700). It is doing the same thing the mcu will reset itself. The funny thing is that all the code is working fine until yesterday. Quotenote that is says this in the documentation Please tell where to find it. all i found is something about VOLTAGE TOLERANCES. thank you for you help.
Quotenote that is says this in the documentation Please tell where to find it. all i found is something about VOLTAGE TOLERANCES. thank you for you help.
unregulated 7v regulated 5vI'm using 5 AA battery to power the whole thing.If I do a omhn test on the unregulated I will get a high reading than it will fade away. I think is my meter because it doesn't look like it is shorted or anything
sorry I don't know if it is lead acid or not, it is the rechargable one from radio shack.
The power going to the controllers is around 18v and 5v for the control.
Are you sure you have it set for ATmega640? Did you ever push the Program button but didn't have power turned on accidentally?