Author Topic: Hi anybod pls help me out  (Read 1806 times)

0 Members and 1 Guest are viewing this topic.

Offline gcs7788Topic starter

  • Beginner
  • *
  • Posts: 3
  • Helpful? 0
Hi anybod pls help me out
« on: March 02, 2011, 11:52:51 AM »
Hello paul ,
                  I was trying to built a remote robot one
                  i was now in design phase , can you please help me out and also i was trying to get an  order from online shop these things ... becoz i cant make all @ 1st time (my guess)
 Here are my few specification on given list

omni wheels -4x (4cm diameter)
servo motor  -4 (high torque rc )
velcro - 4x6 inches
HDPE material (14x8 )And
 Digital rc controller kit  :: Here I need with 6 or more  channel and 3-4 deg's of freedom   
t- nuts  set 1/4" - 8
for attaching servos to channel  is they provide connectors to insert into rec channel robot is around 7-8 kgs has to weight is this wheels n servos can bare the weight
please let me know any thing that i need to buy for construction have look @ once design phase

THanks in advance

Offline praveen_khm

  • Full Member
  • ***
  • Posts: 48
  • Helpful? 1
    • Robot Platform
Re: Hi anybod pls help me out
« Reply #1 on: March 04, 2011, 04:12:47 AM »
It is always good to order once you are through with your design and schematics, or atleast that is how I work. If you add a design or schematic here and the complete description, it is easier to help you out.

For heavier weight, it is always good to use a geared motor.

edit: Might help you:
« Last Edit: March 04, 2011, 04:14:11 AM by praveen_khm »
Robot building is all about sharing and learning
------------------------------------------- : Beginners guide to Electronics & Robotics