BTW when programing my mcu, did you use my cable?
I used the more expensive programmer. I havent had much free time lately so I havent been able to debug the problems I have had with my cheaper programmer . . .
Our problem deviated from (Admin's pics) when I got the programmer port and it had a 6 pin configuration not the ten that is on the web site.
Which programmer are you using? The more expensive one comes with both a 6 pin and 10 pin adapter.
When does the LED on the circuit board come on?
Well it is supposed to come on right when you turn it on, but I made a dumb mistake in the code. Ill show you how to fix it.
In the file Photovore_v1.c, look for this line:
LED_off();//turn LED on
If it isnt already obvious, change that to LED_on();//turn LED on
Then just compile it again.
I think I was debugging the code, changed it, and then didnt change it back . . . The servos should work either way.
Ill be coming out with some newer simpler code soon. Ill also soon come out with some test code so that you can verify that your board is working properly.