Author Topic: Need help to let omni robot rotation around 1 point  (Read 9856 times)

0 Members and 1 Guest are viewing this topic.

Offline danzhilanTopic starter

  • Beginner
  • *
  • Posts: 2
  • Helpful? 1
Need help to let omni robot rotation around 1 point
« on: May 01, 2018, 10:51:58 PM »
I made a robot by 4 omni wheels on each sides.
I want to the robot rotation moving around 1 point. The radius can be controlled by the variate. I know the equation for the X and Y axle distance is X?+Y?=R?. But I cannot change it to the velocity of omni wheels at X and Y axle.
Is there any example or idea about it?
Many thanks for your help!

Offline rouncer

  • Jr. Member
  • **
  • Posts: 41
  • Helpful? 0
Re: Need help to let omni robot rotation around 1 point
« Reply #1 on: May 02, 2018, 03:54:30 AM »
Get the angle from the centre, and then use the tangent of the circle, to direct the x&y of each wheel.

The easy way to do that, is get the difference of the position of the wheel and the centre of the robot/car,  then simply swap the x and y coordinates around.

That should be the x&y's for each wheel.

Heres a picture of what I mean->
https://scontent-syd2-1.xx.fbcdn.net/v/t1.0-9/31749447_649775965370464_2109055660774653952_n.jpg?_nc_cat=0&oh=604e58cd7b9ef48739b67ea38feea573&oe=5B8C27ED
« Last Edit: May 02, 2018, 03:56:57 AM by rouncer »

Offline danzhilanTopic starter

  • Beginner
  • *
  • Posts: 2
  • Helpful? 1
Re: Need help to let omni robot rotation around 1 point
« Reply #2 on: May 02, 2018, 07:28:04 PM »
Thanks a lot for your idea.