« Last post by Bi1cool on December 02, 2022, 05:03:55 PM »
hello, i want to build a little robot as a prototype for a bigger one (the size of the real Spot mini). I was wondering how can i make the leg moving. I know spot use a piston system form the knee. Does it realisable on a small robot (like 50cm long and 20 cm height)? PS: sorry for the mistake, I'm french.
« Last post by Katrina8559 on October 19, 2022, 02:59:58 PM »
I am a relatively new robot builder and I would love some advice on how to bring this creation to life. I am interested in making a mobile robot that has a retractable arm that can be controlled easily. I am able to code in javascript, python, and c+++ so any programming tips are welcome.
« Last post by Operator_Ghost_ on October 17, 2022, 03:40:19 AM »
So I wanted to design a robot with ring picking and tossing mechanism on it, dimensions are 500x500x500mm. Tossing should be done using spring or rubber band, can anyone help me out please!
« Last post by Abby123 on September 18, 2022, 08:15:45 PM »
Hello, blogger; I hope to recommend two companies in China to you. The quality of PCB boards is excellent. https://www.wellpcb.com/ https://www.ourpcb.com/ hoping it is helpful to you; thank you for your support, Abby
« Last post by mklrobo on August 03, 2022, 07:06:21 AM »
Excelsior!
In reference to your motor problem, it might be best to see if you can find a nice motor and put the gear down assembly yourself. While this may seem tedious, you will know how every part of the motor works. If you get easily acquired motors, with a gear pack you can use, that will go above and beyond what everybody else has. Good luck!
See you next time, same robot channel, same robot time!
« Last post by mchahn on July 28, 2022, 11:59:41 PM »
I've finished a 2-wheeled rc robot that uses two N20 motors. I'm now starting a project for a bigger 2-wheeled robot. I have been going crazy trying to find a geared dc motor bigger than the N20 (~20mm long by ~10mm radius) but smaller than the zillion 60mm long planetary motors I've found. Ideally it would be the following ...
30mm to 40mm long 15mm to 20mm diameter 5v to 12v 250 to 500 rpm
I don't need an exact model. Just pointing me to some category of motors anywhere near these specs would be greatly appreciated. Thanks in advance...
« Last post by Kisso on July 25, 2022, 05:21:13 AM »
Hello guys!
I have a job opportunity and i don't want to miss it and i really need more practice with Kuka because its been so long since i worked with kuka , im not confident enough.
So please if anyone has the Kuka Sim Pro Software , doesn't matter if its Free Trial . i just need someone to upload it (Setup files) on google drive or wherever. because there is no way i could get it on official website. Thanks!
Recent Posts
Excelsior! 
See you next time, same robot channel,