Society of Robots - Robot Forum

Electronics => Electronics => Topic started by: ocservo on April 08, 2015, 08:56:01 PM

Title: samples of some robot servo
Post by: ocservo on April 08, 2015, 08:56:01 PM
hello,everyone. I had some samples of robot servos,made in our workshop. Here are some data,if u want to know more. you can come to our site or just keep me post。
ROBS-301
Operating Voltage     9.6V            12.0V            14.8 V
Stall Torque(oz-in)   333.3 oz-in   402.8 oz-in   472.2 oz-in
Speed (RPM)              50                         55             60
Size (mm)   52×28×34.5      
Weight (g)   72 g      
Resolution   0.15°      
Operating Angle   360°or Continuous turn      
Standby Current   2500 [email protected]      
Stall Current   20 mA      
Operating Temp   -10℃~80℃      
Communication protocol   LSS OR PWM      
Protocol Type   Full Duplex Asynchronous serial Communication      
Bus Interface   TTL Level Multi Drop      
Control System   Bus Packet Communication      
Module Limit   245 Valid addresses      
Com Speed   38400bps-1Mbps      

this is the robs-301,we also made type 601 and 801,the data is on our site.
If u are interested, we can offer u a sample. By the way, our company is in guangzhou  China.
(www.oc-servo.com (http://www.oc-servo.com))


 
Title: Re: samples of some robot servo
Post by: ocservo on April 08, 2015, 09:00:23 PM
(http://www.oc-servo.com/upimg/2015020915474582.jpg)

I fogot to give out the image
Title: 1
Post by: ocservo on July 16, 2015, 07:35:47 PM
because of the copyright, there is no LSS mode in the ROBS-301, we stop selling ROBS-301,601,801