go_away

Author Topic: Getting the limiting pin in the servo.  (Read 1313 times)

0 Members and 1 Guest are viewing this topic.

Offline HellboyTopic starter

  • Beginner
  • *
  • Posts: 1
  • Helpful? 0
Getting the limiting pin in the servo.
« on: July 10, 2010, 04:14:35 AM »
I wanted to modify the servo for 360 rotation.
The gears in the servo are metal servo and there is a small metal pin in the main gear.
Is there anyway of getting it out?

Offline Joker94

  • Supreme Robot
  • *****
  • Posts: 1,119
  • Helpful? 26
Re: Getting the limiting pin in the servo.
« Reply #1 on: July 10, 2010, 04:26:43 AM »
generally the pin is not fixed, it is just there with a tight fit.

I have never seen a metal gear servo with a fixed pin.

if it is fixed the next thing is to grind it out with a file, or even better a tool like a dremel. take any means necessary to remove the mechanical stop without damaging the gear.

 


Get Your Ad Here