go away spammer

Author Topic: noob question  (Read 3437 times)

0 Members and 1 Guest are viewing this topic.

Offline endustoTopic starter

  • Beginner
  • *
  • Posts: 1
  • Helpful? 0
noob question
« on: May 30, 2007, 09:19:41 PM »
i just have a beginner question about remote control robots.  how do you know which switch on the transmitter operates which servo on the robot, or how do you tell it which one to operate?

Offline TravelingPencil

  • Jr. Member
  • **
  • Posts: 31
  • Helpful? 0
Re: noob question
« Reply #1 on: May 31, 2007, 05:37:37 PM »
if it is not labeled then just plug a servo into channel 1 reciver and push each button on the transmitter one at a time until the servo moves. then label the button that makes the servo move channel 1. then unplug the servo and plug it into channel 2 on the reciver and repeat the above process until you have the channels all figured out.
Hope this answers your question.

 


Get Your Ad Here