go_away

Author Topic: Selecting motor for self balancing robot.  (Read 1669 times)

0 Members and 1 Guest are viewing this topic.

Offline peek-a-booTopic starter

  • Beginner
  • *
  • Posts: 1
  • Helpful? 0
Selecting motor for self balancing robot.
« on: January 11, 2016, 01:28:54 PM »
I'm thinking of building self balancing robot. (Thinking of using encoders to measure the distance covered)
My first question is, should I go for servo motor or Brushless DC motor?

The robot should be able to traverse on smooth surface, carpeted surface and surface inclined at 10 degrees angle.
How do I calculate the required rpm and torque of the motor?

Thank you.


Offline bdeuell

  • Robot Overlord
  • ****
  • Posts: 189
  • Helpful? 15
Re: Selecting motor for self balancing robot.
« Reply #1 on: January 27, 2016, 05:02:59 PM »
you will want to use a servo (which just means there is close loop feedback control) so that could be a brushless motor or any other type of motor. Brushless servo motors are very common in industrial applications. if you have a geared reduction (which you will probably need) low backlash will be very important.

 


Get Your Ad Here