Don't ad-block us - support your favorite websites. We have safe, unobstrusive, robotics related ads that you actually want to see - see here for more.
0 Members and 1 Guest are viewing this topic.
Connect all the ground symbols in the schematic and you will have connected all the grounds together.
1. Is the schematic wired correct?2. Where & how do you connect the ground?3. Is this Programmer safe, Could it fry the components or my computer?If anyone has built this, could you show me how?
Do you also connect (4 6 8 10) of the ICSP to the ground as shown in avr-icsp-10.gif ?
2. The ground is the short line, such as the end of the ISP pin 6 connection.
Where else NOT SHOWN on the schematic is the ground connected ?
Absolute: What software will you use with this circuit?
Quote from: GearMotion on April 10, 2009, 06:03:21 PMAbsolute: What software will you use with this circuit?Ponyprog ? will that work ?
GearMotion: Great work, thanks. You a great benefit for us amateurs.If I use a 2x5 pin header rather than the 2x3 what modifications will be made on the board you made? Is it better to use a 2x5 OR 2x3 Header for the $50 Robot?
Absolute: Do you have all of the parts that you need to make this serial programmer?
Quote from: GearMotion on April 11, 2009, 04:35:50 PMAbsolute: Do you have all of the parts that you need to make this serial programmer? Gearmotion: Yeah, i do